PT Bangun Ibu Pertiwi  ·  Licensed Drilling & Blasting Contractor

O2 ROCK SPLITTER.

Rock breaking that is
  • economical
  • safer
  • greener
  • controlled
  • economical

From PT Bangun Ibu Pertiwi — a licensed drilling & blasting contractor that manufactures O₂ Rock Splitter consumables locally in Indonesia, serving mining, quarrying, and construction.

Locally-Made Consumables Full Permits P1 · P2 · P3 Since 2018 No Fly-rock
Non-Explosive Rock-Breaking Alternative ◆ More Controlled ◆ Minimal Vibration & Fly-Rock ◆ Efficient for Mining, Quarrying & Construction ◆ Backed by a Licensed Technical Team ◆ Consultation & Site Survey Available → ◆ Non-Explosive Rock-Breaking Alternative ◆ More Controlled ◆ Minimal Vibration & Fly-Rock ◆ Efficient for Mining, Quarrying & Construction ◆ Backed by a Licensed Technical Team ◆ Consultation & Site Survey Available → ◆

What is O₂ Rock Splitter?

Splitting rock from within.

PT BIP's newest product line — a non-explosive alternative that harnesses the expansion of liquid oxygen (LOX) inside the borehole. It complements, rather than replaces, our conventional blasting services.

≈800×

LOX → gas volume expansion

−183°C

Liquid oxygen temperature

O₂ Rock Splitter Liquid oxygen fills a borehole, ignites, flashes to gas expanding about 800 times, then fractures the rock from within. O₂ Rock Splitter — gas-energy rock breaking Charge — liquid oxygen fills the hole Ignite — the electric launcher fires Flash to gas — expands about 800× Rock breaks from within — minimal fly-rock

Liquid oxygen at −183°C flashes to gas → expands ≈800× → gas pressure breaks rock from inside the borehole

New Technology in Indonesia

Not an explosive. And we don't promise the same results.

O2 Rock Splitter is a rock-breaking alternative for sites where explosives can't or mustn't be used. As a technology still new to Indonesia, we want you to start with the right expectations — what it can do, and what it can't.

We always recommend a trial first

What you can expect

Strengths
  • No shock wave — low ground vibration
  • Minimal fly-rock; some noise, but much less
  • Simpler permitting — with permit assistance from PT BIP included in the service package
  • Storage in an ordinary warehouse, transported as regular cargo — not special explosives cargo

What to understand

Limitations
  • Power is lower than explosives — not a substitute for production blasting
  • Rock splits & cracks in place, rather than shattering and throwing
  • Results vary by site — there are no fixed numbers
  • Execution still by a KIM-licensed shotfirer

Why We Always Recommend a Trial

Our experience: no two sites give the same result.

Across trials with several customers, the results have always differed — depending on the rock, hole conditions and working environment. That's why we don't promise numbers up front. A trial gives you a real picture before you decide, and gives us the basis to design the right pattern.

  1. STEP 01
    Site surveyRock type, surroundings and work target.
  2. STEP 02
    Field trialA few holes with varied patterns, at the real working face.
  3. STEP 03
    Evaluate resultsCrack pattern, material size, vibration and productivity.
  4. STEP 04
    Project designSpacing, depth and cartridge count tailored to your site.

We'd rather set honest expectations up front than make promises the field can't keep.

Request a trial at your site →

FAQ

Questions we hear most often

No. O₂ Rock Splitter doesn't work through a detonation like explosives; it uses the gas expansion of liquid oxygen inside the borehole. Even so, it is still executed by a KIM-licensed shotfirer in line with applicable regulations.

No — and it isn't designed to be. Its power is lower than explosives: rock splits and cracks in place rather than shattering and being thrown. The same volume usually needs tighter hole spacing. O₂ Rock Splitter is an alternative for sites where explosives can't or mustn't be used — not a replacement for production blasting.

It fits best near communities or infrastructure, at sites sensitive to vibration and fly-rock, on projects held back by explosives permitting, and for limited breaking work such as boulders or tight working faces.

In our experience with several customers, results have always differed from site to site — depending on rock type, fractures, water conditions, and hole diameter and depth. A trial gives you a real picture before you decide, and is the basis for designing the right pattern for your project.

The permit application flow is similar to explosives, but the requirements are far simpler — and you don't handle it alone: PT BIP provides permit assistance and guidance, already included in our service package. Storage only needs an ordinary warehouse — not an explosives magazine — and shipping goes as regular cargo, not special explosives cargo.

No. Crews used to drilling and blasting only need a short training on the O₂ Rock Splitter procedure. PT BIP supports you in the field — from the trial until your team can run independently.

In that case we recommend the rock-breaking service from our subsidiary, PT Bangkit Putra Pertiwi. The BPP crew handles execution at your site, so you don't need to build your own team. Contact them directly at info@pt-bpp.co.id.

Cost depends on rock type, work volume, location and access, hole diameter and depth, and whether you buy direct or use the service. Because results differ at every site, we give a final estimate after a survey and trial.

Next
How It Works
See step by step how the O₂ Rock Splitter works.
Continue →
WhatsApp